The joint bars are sided with the chisel, which allow to remove a lot of material quickly. The Luthier lightens the bars and gives them an ogival profile....
The boards are glued together to form the soundboard. The method used here is Spanish: the boards are strung together with a series of corners and glue....
The blade is sharpened on two stones, one with a large, and the other with a smaller grain. The stone is moistened with water. The angle used should be...
Finishing with the plane of the join between the two boards, which will form the soundboard.
Sebastian has been working as a luthier for the past 13...
Finishing with the luthier plane of joint bars. The sound will change accordingly.
Sebastian has been working as a luthier for the past 13 years. He...
To create a soundboard, two boards are needed. They come from the same board which has been split into two parts. The luthier planes them down to obtain...
The planer blade is sharpened on a grindstone with a water stone. In order to work with wood, the desirable angle for chisels and planes should be 25 °.
Sebastian...
Wood chisel to cut the ends of the bottom of the dam.
Sebastian has been working as a luthier for the past 13 years. He creates guitars and specialises...
